- Home
- Equipment
Refine by
L J Engineering Environmental Equipment & Supplies
38 equipment items found
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 300 Resistance Temperature Device (RTD) measures spot temperature by outputting a resistance change to a gauge or transmitter. This change in resistance, which is directly proportional to temperature, is detected by a precision input bridge circuit in the transmitter. In addition to two element leads, a third reference lead is provided. The reference lead is used to remove lead wire ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 350 (ATP) represents state-of-the-art temperature measurement, and is accepted worldwide to use as a standard for custody transfer inventory and corrected volumes. The MCG 350 Averaging Temperature Probe (ATP) allows gauges and transmitters to sense temperature through the change of resistance in the probe. The MCG 350 possesses a series of temperature sensitive elements which all extend ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Only True Self Testing Probe. The MCG 1090 Level Alarm Probe brings state of the art technology to overfill protection. The competitors systems typically only check the wiring and probe electronics. The MCG 1090 includes a solenoid to physically move the displacer as an actual level would. In keeping with the L&J tradition, the MCG 1090 has gone a step further than the competition in ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 92302 Liquid Level Indicator is a reliable float actuated level gauging system. It is designed to provide reliable and virtually trouble-free service for installation not requiring accuracies better than ±1 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 2100 is able to communicate with any of the L&J engineering Level Gauges. The calibrator is equipped with the ability to display the level reading, temperature reading and the discrete input status being sent back from the transmitter. This enables the operator to check the conditions of the field wiring and proper operation of the control room. In the troubleshooting mode, different ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Information that can be transferred from WirelessHart field devices to host control systems: Product Level, BS&W Level, Temperature, Discrete Input Status, Diagnostic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Standard Configuration: The MCG 3200 Field Interface Card Enclosure is a powerful, flexible interface that accepts data from standard serial devices via TTL, current loop, RS232C, or RS 485 and outputs Tankway regulated field power and proper signal voltage levels. Moreover, since each field wiring branch can be isolated using the MCG 3200, a complete cable failure in one branch will not affect ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Standard Configuration: Provides L&J Tankway field interface to a host computer. The MCG 3281 provides communication to the entire L&J family of products which include the MCG 2000MAX Level Transmitter, the MCG 1600SFI Smart Flash Infrared Radar Gauge, the MCG 1500SFI Smart Flash Infrared Servo Gauge, and the evo 2600 Radar ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
L&J Engineering offers the TDC 3000 PLCG compatible interface to help keep with the growing demands of the industrial world. The MCG 3221 is a microprocessor based device supporting bi-directional ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
One System to Manage it All. The MCG 3905 WINGauge Inventory Management System is a state-of-the-art Microsoft Windows application that offers multi-protocol, multi-loop, real-time gauging of up to 1,000 storage tanks throughout your ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Accurate and Reliable: The construction of this probe makes it ideal for severe service installation where reliable performance is essential. The explosion-proof housing is approved for use in Class I, Division 1, Group C and D environments, allowing the MCG 1030 to be used in application where the distance from the probe to the receiver is too great to utilize an intrinsically-safe ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Peace of Mind: The MCG 7030 Touch Panel Alarm Monitor offers complete remote checking of alarm probes through cutting-edge technology that makes the system accurate, extremely reliable and fully compatible with the MCG 1090 and the MCG 1095 Level Alarm ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 1200M Series Transmitter is an extremely flexible microprocessor based RTU. Receiving an analog input it converts the analog signal to digital, displays the data, and transmits the data via the L&J 4-wire data highway or other digital protocols to the system computer. The MCG 1200M can also provide the loop power for 24VDC loop powered ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
L&J Engineering has made replacing existing float and tape gauges with radar level gauging technology simple and convenient with the all new evo 2600SW Stilling Well Adapter. With the evo 2600 and evo 2600SW Stilling Well adapter, the evo 2600 can easily fit into an existing 1.5" coupling for the float and tape gauge so there's no need to add additional nozzles to an existing storage tank. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
L&J Engineering has once again revolutionized the Transmitter market with its latest edition of the MCG 2000 Transmitter, the MCG 2000 MAX. The MCG 2000 MAX uses L&J’s revolutionary new absolute magnetic encoding (patent pending) to provide the greatest accuracy ever offered in the history of transmitters with 1/32 of an inch standard and with 1/64 of an inch accuracy as an ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
L&J engineering's MCG 3630 Touch Panel Tank Monitor provides field polling support for level, temperature, BS&W and density. It displays information as text or in graphical format in bar graphs for multiple tanks. The MCG 3630 provides a touchscreen selectable system allowing the user to set gauge address, enable tanks for polling and scale factors for ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 1010M Receiver harnesses the impressive accuracy and resolution of the MCG 1030 or MCG 8150 series Magnetostrictive Probes to provide continuous level measurement and local access to the data. The MCG 1010M is designed to provide reliable, low maintenance operation under even the most adverse of conditions. With a graphical LCD readout and infrared programming capabilities as standard ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The MCG 2420's versatile design allows it to be easily installed into existing applications. The MCG 2420 can easily couple to the Shand & Jurs Model 92302 Liquid Level Indicator. The MCG 2420 can also couple to the Varec 6700 Liquid Level Indicator. Depending on which option is chosen, the MCG 2420 will come with the appropriate adapter kit for that specific liquid level ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Resistance Temperature Detector: The MCG 310 Resistance Temperature Detector (RTD) measures spot temperature by outputting a resistance change to a gauge or ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Standard Configuration: The MCG 3210i Intelligent Field Interface Card Rack is a powerful, flexible interface that allows L&J engineering host systems to communicate with field devices communicating L&J Tankway communication protocol, regulates the device power, signal, and voltage levels. Moreover, since each field wiring branch can be isolated using the MCG 3210i, a complete cable ...